To solve the problem of affecting the ride comfort of electrolytic aluminum foil（1）

2017/7/4 16:41:01

Ensure that the rack equipment accuracy standards

The rack material is cast as much as possible and subjected to secondary aging to eliminate internal stresses. And do a good job preserving work to ensure that the rack in the production process is not eroded. Although the rack in the installation process using pin hole positioning, bolt tightening adjustment, but still need to do after the rack assembly assembly of the accuracy of the work, the final design of the assembly accuracy to verify the design requirements. And in the daily equipment maintenance process must be regularly on the rack accuracy and accuracy of the installation of equipment to repeat the accuracy and adjustment to ensure that the equipment in the effective equipment accuracy error range.

Protect the roller running in good condition

Rotating the roller to improve the flexibility of rotation. Requires at 1800 r / min speed maximum circumferential gravity of not more than 5g. Roller in the installation should choose a small size imported bearings and lubrication work to ensure that the roller production process running flexible. Practice has proved that the more flexible roller rotation of the aluminum foil damage less. In addition, the electrolytic aluminum foil roller in the process of adjusting the tension from the end of the reel to the end of the gradual increase in the law, the increasing proportion of equipment vary due to different enterprises, but the overall step by step increase A large proportion of not more than 0.5% is appropriate.